arfur mo Posted October 10, 2007 Share Posted October 10, 2007 We have 'DO NOT BURY - ALARM CABLE!' Its a printed role we have made up, printed in BOLD red text. they still bury them, and almost always bury the panel end, now that is what a lump hammer was made for your right, i'd never thought of hitting the plasterer with it before regs alan If you think education is difficult, try being stupid!!!! Link to comment Share on other sites More sharing options...
arfur mo Posted October 10, 2007 Share Posted October 10, 2007 To stop your cables going awol put a six in nail in the corner where you want passive to be,tape cable to nail with a pig tail attached .Works every time.On the second fix pull nail out cover hole with the pir.I do this on every new build with little if any problems just make sure you drive the nail in far enough. make the tails too big and how often do you go back to site to find the 110 site lighting wires strung up by the alarm cables regs alan If you think education is difficult, try being stupid!!!! Link to comment Share on other sites More sharing options...
mark auto Posted October 21, 2007 Share Posted October 21, 2007 ever find that the brickies bring the bell cables out at totally different heights? is a right pain in the posterior, especially on semi detached where the foreman wants the bells in EXACTLY the same place on each...... Link to comment Share on other sites More sharing options...
IMSSYSTEMS Posted October 23, 2007 Share Posted October 23, 2007 fit a wirless system and charge the custumer more lol Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.