Alister Posted December 1, 2006 Share Posted December 1, 2006 We're getting a number of Dedicated Micro's DS2 and D4 hard drive failures - more than I would expect. Also a lot of "Disk burn fail" messages when attempting to copy to blank CD-R's - (using Verbatim x 52 blanks). Any remedies/comments? Link to comment Share on other sites More sharing options...
james.wilson Posted December 1, 2006 Share Posted December 1, 2006 new units? not something i have had. I have had hd fails but usually on machines 4 or 5 yrs old securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
WatchdogSecurity Posted December 1, 2006 Share Posted December 1, 2006 We're getting a number of Dedicated Micro's DS2 and D4 hard drive failures - more than I would expect.Also a lot of "Disk burn fail" messages when attempting to copy to blank CD-R's - (using Verbatim x 52 blanks). Any remedies/comments? Weve had a bad batch of Maxtor disks in the past on a stack of workstations we built. Watchdog Security (Manchester) Link to comment Share on other sites More sharing options...
cutwitt Posted December 2, 2006 Share Posted December 2, 2006 Only remedy for hard drive failure is back to DM. Disk burn fail could be a number of things but again most likely a case of return to DM. As for comments Link to comment Share on other sites More sharing options...
black knight Posted December 2, 2006 Share Posted December 2, 2006 good idea IMO, but price is too high for general use in the market place i would think. Customers look at price and trying to explain to them the benefits of going this route would be hard work (bearing in mind i,m a humble ALARMS engineer and my CCTV knowledge is limited) paul THE BLACK KNIGHT "Any comments / opinions posted are my opinion only and do not represent those of my employer or Company." Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.