Search the Community
Showing results for tags 'Optima Compact'.
Hello, I`m new in this site and I´m here to ask to this comunity that I have a problem with a Optima Compact G3 396. I'm teenager and my landlord doesn't remember the code and he says that he doesn´t want repair the alarm, he says just switch off, but the case that I need the alarm because I´m going to leave in a few weeks and I have got many things inside. The problem is when I switch on the alarm in the central electricity panel, it's start to sound very louder outside and inside, i´ve tried to press reset twice withing 5 sec. nothing happened, I´ve tried put ###DEFAULT CODE### as
Hi, Just installed an optima compact 4 the other day, finished the programming, and everything seemed to work fine then needed to finally remove the extension speaker to a different position, so I did this whilst in engineers mode. I had to add this as the speaker on the box itself only worked whilst this was connected. I then reconnected the speaker and firstly there was no sound inside at all no keypad beeps or setting beeps. Is this normal and is there something that could be causing this?? for any help in advance Also the control panel then seemed to lock up
Hi, Just reticently installed an optima compact for someone using existing wiring, Everything seems to work fine apart from the zones that I've set as intruder keep going into timed mode. I've set zone one only as timed, I've set the entry and exit time to 20 seconds which now works on all detectors, and I made sure that zones 3-4 are not set as inhabited or timed, and all in used zones but these zones still keep working the same as zone1? NB I used existing wiring from a previous install, but I did note locations and made a cable schedule. Anyone got any ideas what could