btssn
-
Posts
28 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Posts posted by btssn
-
-
Just now, norman said:
Yup, the ones you don't want though, only cause pain in the longrun.
It's so true they always become a problem later down the line as well.
-
Just now, norman said:
You know it makes sense...
I totally agree however you know some customers try to be cheap
-
To fix you would need find tamper fault, set a multimeter to resistance and place on 2 green wires places in tamp, you should see a reading near 0, if not you will need to break down and test each zone wire individual until fault is found, in contact the tamper is magnetic, on pir the tamper is mechanical switch or electronic contact.
The junction box is where each tamper is wired in series so that if loop is broken tamper loop the alarm goes off.
-
Thanks told customer only option is upgrade panel and keypad
-
42 minutes ago, james.wilson said:
No the keypad has to match the panel
Did think so
Sounds like a plan
-
would the galaxy mk7 keypad work with this panel as they have built in prox fob
-
10 hours ago, al-yeti said:
But what Pete said should work , although a stand alone hkc keypad would do it to if your in the trade
Do you mean this keypad would keypad function ? most likely not however could be wired to use rf to set and unset
https://www.hkcsecurity.com/en-GB/products/intrusion-keypads/rf-rkp---rf-remote-keypad-/
-
8 hours ago, james.wilson said:
I think you will struggle, the gen 4 prox option was popular, while fobs can be sorted hardware can't. I'd suggest a panel change
Already suggested however customer does not want to spend that kind of money may just leave them with keypad until they get fed up.
-
-
hmm the galaxy max 4 is more expensive, client is bit cheap skate lolz, i will check manual i believe it uses key switch input so the ss2 could be used to set and unset, i do not need fancy lights as will be fitting next to keypad so just simple set and unset.
-
Just now, al-yeti said:
Including labour?
I shall hope not
-
I guess i could use door entry fob to set and unset system
something like this
https://www.doorentryonline.co.uk/acatalog/SR2-Proximity-card-key-fob-reader.html
-
14 minutes ago, PeterJames said:
I was joking
Is this only compatible with pyronix panel ?
-
9 minutes ago, PeterJames said:
Yeah that looks like it will definately work with a Honeywell panel
Perfect will speak to client
1 minute ago, PeterJames said:no stock when you get to checkout this lockdown has really screwed up stock levels
-
13 minutes ago, PeterJames said:
Ill let Santa be the judge of that
That is if he makes it out of lockdown
https://www.onlinesecurityproducts.co.uk/prox-readers-fobs.html
seen this one never used before
-
I don't think client wants to spend more than £50 - £80 current simple set reader has failed is reason for upgrade
-
omg seriously some people
-
The alarm is honeywell accenta mini g4 with lcd keypad, the Simple Set reader SS/01 is no longer available and seems to be discontinued, what other proximity fob readers can be used instead of replacing control panel and keypad.
Thanks peeps i l know it been a while hope everyone is good
-
Thanks for all your replies here is extract from insurance company
see section 8zz2 alarm clause
I need to know if current system which is bs4737 put under contract or will they have to upgrade system ?
-
thats good to hear you have to link out and then go through panel to reset as you know i wont go into detail on here
-
so the upgrade would mean grade 2 alarm panel with keyfob such as galaxy 2-12 ?
the company that take on maintenance contract will replace voice dialler with an arc device ?
-
The current system installed is honeywell as follows;
8SP399A Accenta min g4 panel (unsure)
8IR100 Pir sensors (grade 2)
8EP420 reason 8 bell box (grade 2)
8EP276A informa speech dialer (unsure)
SS/01 simple set reader (unsure)
The insurance require the alarm system to registered with nsi or ssaib installer therefore would like to know what grade is system overall and what will need to replaced to make alarm compatible to be on contract ?
Thanks in advance.
-
Quote
hi did you resolve this if not pm me i have manual and info for 2-12 will not post that info on public forum
-
sorry typo error you are correct i will edit post
Global Tamper - Old Veritas Excel
in !!..DIY Installers..!!
Posted
haha