datadiffusion
-
Posts
12,329 -
Joined
-
Last visited
-
Days Won
110
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Posts posted by datadiffusion
-
-
If you're desperate I've got a New Menvier somewhere, pcb only, I think it is a 40. I know it has a net connection.
-
Yeah, it blew it up, soz & the damage bill is on the way
- 1
-
Now doesn't seem like a good time to move here? What sort of security do you do at the moment?
PS Your link was a removed as we don't allow them. Thing is we get a lot of people who just use our site as an advertisment board
or other purpose, not really intending to use the forums.
-
13 hours ago, Logan said:
How much alcohol have you consumed?
Nowhere near enough
-
12 hours ago, PeterJames said:
Because your now just a public member, and we have to pay for the comfy seats in the mod lounge
And the nespresso machine
-
evry bodie kneeds god nieghbors...
jus a fwendly wayve each mourning, helps to make a bettar doy
nieghbors, kneed to get to no each otter
Next dor is ownly a formus step away*taken from the edition shown only in the Wales and border areas
-
14 minutes ago, MrHappy said:
Personally I found adding resistors or leaf tampers worked for 10yrs + before EN
Yes but sometimes you just want to get in and out and not have to go back, and with the tact option usually comes proper terminals not
screws. I find esp. when you are installing a system to crappy builder installed CCA you can just forget using screws anyway.
-
Haven't used contacts with leafs for years now, all G2 with switch, same for JBs it's all (mostly) only pennies.
-
6 hours ago, ttstick said:
Never had this problem with microswitch tampers that I can recall so I would like to think it's not my s**t wiring.
You've sort of answered your own question there - I'd avoid products using leaf tampers when you can TBH
-
11 hours ago, PeterJames said:
I dont think you will find any vikings called Roger, they will have names like Harald, Svend and Knud
or Knut
-
Sets when linked out at panel end or contact end though?
-
14 hours ago, slacky said:
the pirs wasn't that responsive to movement
Just out of interest how did you test them?
You're aware that to save battery power they only detect every 180 seconds after each activation?
-
Shame you could have almost certainly got a 9651 for the same money which is what it sounds like you are looking for now.
-
Cor blimey guvnor!
-
Its a bottom of the range unexpandable 8 zone panel
-
1 minute ago, Logan said:
Also id biscuits go rouge sometimes
It's not an ID panel only the 840 as an extra board supports this IIRC
-
20 hours ago, al-yeti said:
Data fusion is your neighbor I think
Sorry not one for us
-
Yeah I'd have to say even as a scanny fan this is never a panel I've wanted to support.
Actually I've only ever fitted an 816. Does the 808 only support starbrust then?
-
Yeah sorry I didn't notice you were trade.
I too checked the manual and like you say it's not in there!
Do you deffo get the 'Cant exit faults = 1' type text when you try and exit, but before this, then?
-
Wow, an 808 on starburst
Unfortunately I only ever used the starburst as an arming station.
Do you have the eng manual though?
-
23 minutes ago, james.wilson said:
Obviously this will go flat
Possibly quite quickly depending on how well you've been maintaining it
Have you got a voltstick handy that glows up near mains power, or a multimeter?
-
-
How about shhhhhhh or you get kicked out of TSI forever?
-
Shhhhhhhh!
Galaxy Flex 20 comms errors
in Members Lounge (Public)
Posted
10,000 that'll stop the port scanners, they'll give up