reidy
-
Posts
812 -
Joined
-
Last visited
-
Days Won
5
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Posts posted by reidy
-
-
Texe installers, is this a real command?
Yeah, it spams the processor and can clear random stuck in the background faults. Has a low success rate but worth trying before powering down a panel
-
Ifsec time ?
Came out a few months back
-
You need to make sure the ComIP has outbound access to the receiver and your Montex receiver has inbound access on port 10001, make sure coms is started in setup on Montex
In Program Digi your Primary No. should be the receiver IP address in this format xxx.xxx.xxx.xxx/10001
-
tw*t
-
The LED's have been changed now
Its a good unit, just follow the instructions and you'll be fine
-
Drill hole on side fill with expanding foam to make it quieter customer pays of course
LOL
I can only imagine his managers response when he reads that docket
-
You in my part of the world?
Even closer now
Ha ha
Now your up and down the uk like me
I am indeed but its definitely a move I needed to make, things are so much better now and I've learnt loads over the past few months
-
I knew this day would come, thank **** I don't work there anymore!!!!
-
The only thing I've found in airing cupboards are towels and alarm panels with toasted batteries, lucky me eh
-
Even when the system is unset they do still light up occasionally when an area has been vacated for a while, they only light up once though and very rarely. Doubt it would have that much of an effect on battery life.
Bang on
-
I suspect the way the people who make the regs will have looked at this is, is that it is catastrophic failure (i.e. not likely to happen). Unfortunately they don't seem to realise how simple it is to block GSM/GPS signals and cut telephone lines, you can do both outside the protected area for heavens sake
-
I hate RSD contacts they fail far to often for my liking.
We have started fitting 2 x Guardall DT 15+ at each side of the shutter (with the mask connected as we only fit G3 Galaxy on monitored jobs)
Our Fa rate is very low and we dont get stupid callouts to rotten RSD contacts.
Even if the job is G2 we connect the mask on 99.9% of the detectors.
QFA
-
-
Don't you live in a council flat?
-
I don't think theres anyone at the top of any business who hasn't done 12 hour days for years. People tend to forget the bosses doing 4 hours a week have usually earned it from years of doing 3 didgit working hour weeks.
+1
-
Personal taste I guess, I used to work for a co that didn't like staples, everyone had a gun in their bag
Staple gun that is
-
I can understand why people dislike them, used incorrectly they can look disgraceful
-
Road surfaces aren't to bad near me but the local council have blown a great wad of cash building "the great wall of norden" which still isn't finished (6 months now)
Plenty of tame feckers though, doing 35 in a 60 should be punishable by fire
-
Apologies, I didn't read all of your post
Try setting a UDL password and using that, when I tried that, it does sort of work but usually results in crashing my ComIP module causing a com port fault
-
TFTP isn't enabled by default in Windows 7, this should help
http://www.andrels.com/wp-en_US/index.php/2009/12/how-to-enable-telnet-and-tftp-client-on-windows-7/
-
Its an SDK with working examples, only got the online keypad just about working in the end and it tended to just crash the ComIP module 99% of the time anyway
-
Shouldn't have to though. The 'company' should have set it up properly in the first place.
OFA
-
Is it bells only?
Premier's come out the box with anti-code reset enabled because its a proper graded panel, you need the installer to come around and disable the feature in the engineering programming menu's
If the installer just gives you a reply to what the keypad quotes, you will encounter the same problem again next time it activates
-
It died or you killed it
Strange Premier 88 Problem
in !!..DIY Installers..!!
Posted
Its official function is to clear the comms buffer but how it actually achieves that I don't know. It's probably just a glitch since you are doing it in anger but it can work from time to time