MrHappy
-
Posts
17,712 -
Joined
-
Last visited
-
Days Won
700
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Posts posted by MrHappy
-
-
One day I'm going to sell up & get a proper job on the tools.
I reckon I could walk into just about anywhere working with just about anything (fire/security) & be the equal of anyone already working there ?
-
1
-
-
Guard Access ?
-
program circuits 1-8 as "Normally Closed" (from zone menu)
Out the box the panel is expecting an "End of Line" circuit
-
you have programmed the zones to suit your wiring ?
-
-
the battery has been fitted the wrong way,
replace the item
-
shunt as in a chubb lock ?
or-
or
-
open then then close the door after replacing the lid (if you have the lid on properly?)
-
47 minutes ago, PeterJames said:
I cant believe I missed that
dementia, quite common at your age....
-
On 22/04/2025 at 10:44, Eugene's DIY Den said:
There are two problems I think. When the panel is powered down and the battery disconnected, the sounder is barely audible, suggesting the battery is at fault. With everything powered up, the sounder volume randomly increases and decreases and has a "scratchy" sound, like when the volume control on a radio is bad. So like you suggested previously, possibly the piezo element at fault too. I'm going to open it up today.
cqr used to have clear plastic & you could see them inside
I use to find them inside cables upto 1m or so, I reckon they crawled in, & each time one crawled in behind the they;d move up more ?
29 minutes ago, Eugene's DIY Den said:Battery not at fault, it was the piezo element. However HKC say the battery should be good for 5 years, and now it's 8 years. However I tested it, and it can still power the sounder for the 15 mins set by the jumper.
battery in sounder will last 2yrs or 20 yrs....
-
1
-
-
pizeo's vibrate,
thrips / thunder bugs or whatever climb inside stuff & don;t vibrate no more...
-
1
-
1
-
-
your document appears to have a requirement for the installation work to be undertaken by an electrical contractor with nic eic or similar ?
-
looking at purchase history-
adi want £630+vat
I reckon all the magnetic locks come from the same chinses factory's-
An RGL MSL-2600 is best I can do outside of fleabay is £91.12+vat
-
-
At work I replaced the Adams right shear lock,
Item came from eBay as adi what £500
-
rim releases normally fall to bit by the machine screws falling out
thread lock helps
its either the door slamming or cnuts braying the door...
a shear lock is very dear !
-
Not found it....
-
1 hour ago, sixwheeledbeast said:
Aux voltage should be around 13.6Vdc. 14 or more is too high it's likely the voltage regulator is failing..
its was probably higher when it was 1st fitted, as the electric board have brought down nominal voltages its reduced !
-
I have a used one in the front store rm
Weather I could find it is a different matter...
-
54 minutes ago, Bryan A said:
Can anyone help me please , trying to locate/purchase transformer for Regalsafe RS55 panel. Or specs ,I.e output Voltage ( I think AC?) thank you Bryan
I'd assume the same thing is on here for a different product-
https://securitytradesupplies.com/?s=transformer
-
How is it solar powered ?
-
red lead in neg ?
black lead in pos ?
-
Iirc you can replace an existing but not add or remove devices with out software
-
6 hours ago, Bunster said:
What ATA would be best for this?
none are likely to work correctly when needed,
you either need a digiair as signalling up grade,
of replace the controls to one which uses an app
Why is this industry so difficult to employ in
in Security Job Requests and Vacancies
Posted
all staff are superstars who should be paid 80k
all subscribers think an alarm is £300