theGman Posted February 4, 2018 Author Share Posted February 4, 2018 2 minutes ago, al-yeti said: What pirs are they, picture? If it's possible you could remove the power tape them up and then swap boards over etc They are Veritas Reflex, Quote Link to comment Share on other sites More sharing options...
al-yeti Posted February 4, 2018 Share Posted February 4, 2018 9 minutes ago, theGman said: They are Veritas Reflex, So these have a little screw holding board in I think, you could take pic, remove 12v tape up and in turn each one tape up separately Then take board out only and swap over with other Some might say upgrade the pirs anyway and scrap it ...... 1 Quote Link to comment Share on other sites More sharing options...
theGman Posted February 4, 2018 Author Share Posted February 4, 2018 1 minute ago, al-yeti said: So these have a little screw holding board in I think, you could take pic, remove 12v tape up and in turn each one tape up separately Then take board out only and swap over with other Some might say upgrade the pirs anyway and scrap it ...... I'd be happier just buying a new PIR, I got the system fitted 15 years ago, so do I need to put in the engineer code, then turn off the 240 supply then change PIR? Quote Link to comment Share on other sites More sharing options...
james.wilson Posted February 4, 2018 Share Posted February 4, 2018 to be fair at 15 yrs id be wanting to replace all. Unless ur still on your Nokia 6110 etc Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.