Jump to content
Security Installer Community

SecurityGuard SGII installation/engineering manual


Guest geoff111

Recommended Posts

Guest geoff111

Good afternoon,

I have just aquired a SGII alarm that I wish to install in my outdoor office.

I am a Programmer/Developer and as such have some fairly good kit I would like to protect.

I have the user manual, but require an engineering/installation manual to assist with the install and programming of the unit.

Any help in this matter would be most appreciated.

e-mail: geoffholmes111@yahoo.com

regards,

Geoff Holmes

Link to comment
Share on other sites

Good afternoon,

I have just aquired a SGII alarm that I wish to install in my outdoor office.

53176[/snapback]

Hi and welcome Geoff.

I have never used this system, but it appears to be wireless and fairly dated.

I am a Programmer/Developer and as such have some fairly good kit I would like to protect.

53176[/snapback]

If this is the case, I'd strongly recommend having a new hardwired system professionally installed. If you have a breakin and your kit goes, your insurance may not pay out unless the alarm was installed and maintained. (Check your insurance)

I have the user manual, but require an engineering/installation manual to assist with the install and programming of the unit.

Any help in this matter would be most appreciated.

e-mail: geoffholmes111@yahoo.com

regards,

Geoff Holmes

53176[/snapback]

Sorry Geoff, but security engineering information and manuals are not given out on public forums, for obvious reasons.

If you don't know......ask.

Link to comment
Share on other sites

But being's as it's an old panel we can point you in the right direction:

The English and Dutch versions of the Securityguard-I & II user manual are available at www.security-gadgets.nl .

Any questions regarding FAI Home security products can be answered by e-mail; FAIHOME@HOTMAIL.COM

All questions are wecome, because help is needed worldwide...

........................................................

Dave Partridge (Romec Service Engineer)

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.