Guest geoff111 Posted May 15, 2005 Share Posted May 15, 2005 Good afternoon, I have just aquired a SGII alarm that I wish to install in my outdoor office. I am a Programmer/Developer and as such have some fairly good kit I would like to protect. I have the user manual, but require an engineering/installation manual to assist with the install and programming of the unit. Any help in this matter would be most appreciated. e-mail: geoffholmes111@yahoo.com regards, Geoff Holmes Link to comment Share on other sites More sharing options...
Brian c Posted May 15, 2005 Share Posted May 15, 2005 Good afternoon,I have just aquired a SGII alarm that I wish to install in my outdoor office. 53176[/snapback] Hi and welcome Geoff. I have never used this system, but it appears to be wireless and fairly dated. I am a Programmer/Developer and as such have some fairly good kit I would like to protect. 53176[/snapback] If this is the case, I'd strongly recommend having a new hardwired system professionally installed. If you have a breakin and your kit goes, your insurance may not pay out unless the alarm was installed and maintained. (Check your insurance) I have the user manual, but require an engineering/installation manual to assist with the install and programming of the unit.Any help in this matter would be most appreciated. e-mail: geoffholmes111@yahoo.com regards, Geoff Holmes 53176[/snapback] Sorry Geoff, but security engineering information and manuals are not given out on public forums, for obvious reasons. If you don't know......ask. Link to comment Share on other sites More sharing options...
Service Engineer Posted May 15, 2005 Share Posted May 15, 2005 But being's as it's an old panel we can point you in the right direction: The English and Dutch versions of the Securityguard-I & II user manual are available at www.security-gadgets.nl .Any questions regarding FAI Home security products can be answered by e-mail; FAIHOME@HOTMAIL.COM All questions are wecome, because help is needed worldwide... ........................................................ Dave Partridge (Romec Service Engineer) Link to comment Share on other sites More sharing options...
Guest geoff111 Posted May 16, 2005 Share Posted May 16, 2005 Thanks for the replies gents I shall head over to the other website now Most appreciated! Geoff Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.