Jump to content
Security Installer Community

Wiring PIR


Guest Chrisyates

Recommended Posts

better than yours yes....

39374[/snapback]

Ofcourse, but what i ment was that you have better ideas than "or fit a system in the outbuilding and use the 4-core to trip a zone on the main system".

Link to comment
Share on other sites

Ofcourse, but what i ment was that you have better ideas than "or fit a system in the outbuilding and use the 4-core to trip a zone on the main system".

39375[/snapback]

if the 4-core is in and cant be replaced, to keep to regs its better to fit a slave system..

Link to comment
Share on other sites

Guest Chrisyates

I don't seem to be getting very far with this query, with the exception of the helpful reminder about using a laching PIR.

Please note that I cannot replace the four wire between the alarm panel and the outbuilding - I am stuck with it.

What I need to know ishow to wire a PIR and two door detectors with a four wire cable. The crux of the question is how do I get power to the PIR?

Any help would be greatly appreciated.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.