Guest davidt Posted September 11, 2003 Share Posted September 11, 2003 I have a control panel fiited to my house that has only 602 written on it but have confirmed that this is a Scantronic panel (confirmed by Scantronic themselves). I also have a remote keypad model 625. I recently had a power cut for about 10 minutes whilst the alarm was set, this has caused the alarm to malfunction. The internal alarm was sounding and could not be reset. I have managed to stop the internal alarm by cutting mains power to the panel and disconnecting the battery but now that all power is reconected I find that I can not set the alarm. The user code has reset to the default 1234 and I have the tamper LED and zone 6 LED flashing. I would like to reset the system but do not have any manuals, can anyone tell me how to reset the panel (NVM) and where can I get a programming manual. Scantronic have the manuals but won't send them to me. Thanks for any help. Link to comment Share on other sites More sharing options...
Service Engineer Posted September 11, 2003 Share Posted September 11, 2003 Here`s the Installer manual. ........................................................ Dave Partridge (Romec Service Engineer) Link to comment Share on other sites More sharing options...
Service Engineer Posted September 11, 2003 Share Posted September 11, 2003 And here`s the User Manual Have fun. 601UG.PDF ........................................................ Dave Partridge (Romec Service Engineer) Link to comment Share on other sites More sharing options...
Guest davidt Posted September 17, 2003 Share Posted September 17, 2003 Thanks for the manuals Dave. I have been able to reset the panel and everything works ok again. You just saved me a £105 call out charge. David Link to comment Share on other sites More sharing options...
Service Engineer Posted September 17, 2003 Share Posted September 17, 2003 Your more than Wecome mate. ........................................................ Dave Partridge (Romec Service Engineer) Link to comment Share on other sites More sharing options...
Pavelow Posted July 20, 2007 Share Posted July 20, 2007 Here`s the Installer manual. Hi I am looking for a Scantronic 602 Installer guide and found this site mentioned by Google. Do you still have a copy of the 601IG.PDF which you mention above. Many thanks in anticipation. Richard Link to comment Share on other sites More sharing options...
morph Posted July 20, 2007 Share Posted July 20, 2007 Sorry but this site does not give out engineering manuals to the public. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.