Hi there,

 

In the process of swapping out a first gen i-on16 with a modern i-30R.

 

It currently has a Version 1 i-kp01 keypad connected to it.

 

When powering up the kep pad is saying Press addr buttons on wired keypads.

 

I'm holding A and Tick down but it is not working.

 

Do you think this will be due to it being a version 1 keypad and it expecting to hardwire onto the bus ?

 

Thanks,

Roy

 

 

33 minutes ago, roydonaldson said:

Hi there,

 

In the process of swapping out a first gen i-on16 with a modern i-30R.

 

It currently has a Version 1 i-kp01 keypad connected to it.

 

When powering up the kep pad is saying Press addr buttons on wired keypads.

 

I'm holding A and Tick down but it is not working.

 

Do you think this will be due to it being a version 1 keypad and it expecting to hardwire onto the bus ?

 

Thanks,

Roy

 

 

It's not modern tho , discontinued so better to return or don't buy it 

 

Get the ion40 range more or less same price 

The keypad adding can be stupid , power cycle and try again 

The i-on30R engineering manual says that it is compatible with the i-kp01 ( firmware version 2.0 or above ) and the V1 i-kp01 uses jumpers to set it's bus address. So, I'm guessing that the A, Tick option does not work on it and so it

cannot be learned by the panel.

 

I know the i-on30R is not current, but it can still get upgraded to the latest V7 firmware and connect to SecureConnect on wifi.

Just following up on this for anyone. It was definately the old Version 1 keypad not being compatible. I just cabled up a new generation keypad to it and it worked first time.