Yoko Zuna Posted May 5 Share Posted May 5 1. How do I install a SEN3045-W Panic Switch to a Bosch 6000 alarm panel? 2. Should it be wired to a zone connection? Note: The Switch only supports 2 wires Quote Link to comment Share on other sites More sharing options...
Yoko Zuna Posted May 5 Author Share Posted May 5 Note: The Switch only supports 2 wires Quote Link to comment Share on other sites More sharing options...
MrHappy Posted May 5 Share Posted May 5 (edited) neither the controls or the button are something we'd see in the UK one circuit wire into the left terminal, alarm value resistor across both the device terminals, a tamper value resistor the right terminal, 2nd circuit wire soldiered on other side of the tamper resistor this would be double end of line resistors, you product or market place may do this differently... Edited May 5 by MrHappy Quote Mr Veritas God Link to comment Share on other sites More sharing options...
Yoko Zuna Posted May 5 Author Share Posted May 5 (edited) Mr Happy, are you able to draw this for me? What about the wiring into the Bosch 6000 panel? Edited May 5 by Yoko Zuna Quote Link to comment Share on other sites More sharing options...
MrHappy Posted May 5 Share Posted May 5 normally closed put 1 wire off the circuit on the terminal with the red wire & the other on ther terminal with the black wire Quote Mr Veritas God Link to comment Share on other sites More sharing options...
james.wilson Posted May 5 Share Posted May 5 according to the diagrom provided above its single resistor non eol so Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.