stelmo Posted September 17, 2018 Share Posted September 17, 2018 Im sure there is an obvious answer to this but its baffled me Ive wired up a relay to zone 2 on a galaxy dimension and set the function to PA silent. when the relay opens all I get is 'System Fault' ive got a 1k resistor in series then a 1k across the relay, so it measures 2k when open and 1k when closed If I change the function of the zone to intruder, from pa silent then opening and closing the relay gives no error! bizarre... Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42388-galaxy-pa-just-triggers-a-fault/ Share on other sites More sharing options...
al-yeti Posted September 17, 2018 Share Posted September 17, 2018 18 minutes ago, stelmo said: Im sure there is an obvious answer to this but its baffled me Ive wired up a relay to zone 2 on a galaxy dimension and set the function to PA silent. when the relay opens all I get is 'System Fault' ive got a 1k resistor in series then a 1k across the relay, so it measures 2k when open and 1k when closed If I change the function of the zone to intruder, from pa silent then opening and closing the relay gives no error! bizarre... Thought that was normal , does it say on keypad system reset required once triggered ? I doubt it comes up with fault but then I just a house basher Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42388-galaxy-pa-just-triggers-a-fault/#findComment-479296 Share on other sites More sharing options...
stelmo Posted September 17, 2018 Author Share Posted September 17, 2018 Definitely says 'System Fault, Reset Required' According to the manual it should result in 'no audible or visual indication of the activation' Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42388-galaxy-pa-just-triggers-a-fault/#findComment-479297 Share on other sites More sharing options...
stelmo Posted September 17, 2018 Author Share Posted September 17, 2018 Im concluding that this is some sort of obfuscation of the event(Personal attack input), whilst also indicating that something needs dealing with? Ill go through the event logs, but ive come to the conclusion that this is by design, and not documented Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42388-galaxy-pa-just-triggers-a-fault/#findComment-479300 Share on other sites More sharing options...
al-yeti Posted September 18, 2018 Share Posted September 18, 2018 (edited) 8 hours ago, stelmo said: Definitely says 'System Fault, Reset Required' According to the manual it should result in 'no audible or visual indication of the activation' Yes that's correct on dimension, I meant it couldn't come up with just fault as you mentioned, Perhaps changing it to 24hr? Custom Sia etc might solve the issue or customer zone and make links where appropriate or something to stop the message display James or nova or galaxy guy know better......they sleeping tho Edited September 18, 2018 by al-yeti Link to comment https://www.thesecurityinstaller.co.uk/community/topic/42388-galaxy-pa-just-triggers-a-fault/#findComment-479301 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now