Rsworld.co Posted October 4, 2012 Share Posted October 4, 2012 Hi I am trying to set up a RS485 Contoller to work with my Samsung spc-100 keyboard. On my Panasonic WVCS574 I snipped the rs485 cable and have the following 5 cables: RED, YELLOW, ORANGE AND GREEN with a brown earth. I have tried numerous ways to get it to work and the cameras dip switches are in a 4 way communication, 1 cctv camera end of line set up, 9600 and is set to id: 01. On the keyboard every time I try and turn the joystick TX flashes on the keyboard. I just want someone to help me and tell me where the coloured wires should go to on the back of the keyboard? ON PANASONIC CCTV: Data Transmission: Red: T (B) Orange: T (A) Data reception: Yellow: R (B) Green: R (A) SAMSUNG SPC-1010 PTZ KEYBOARD Tx1: - + Tx2: - + Tx3: - + TRx: - + Thanks Adam Link to comment Share on other sites More sharing options...
james.wilson Posted October 8, 2012 Share Posted October 8, 2012 Have you tried address 0 for the cam. Different pelco protocols (i assume your using that) use 0 or 1 as the cam 1 securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.