Rsworld.co Posted October 4, 2012 Share Posted October 4, 2012 Hi I am trying to set up a RS485 Contoller to work with my Samsung spc-100 keyboard. On my Panasonic WVCS574 I snipped the rs485 cable and have the following 5 cables: RED, YELLOW, ORANGE AND GREEN with a brown earth. I have tried numerous ways to get it to work and the cameras dip switches are in a 4 way communication, 1 cctv camera end of line set up, 9600 and is set to id: 01. On the keyboard every time I try and turn the joystick TX flashes on the keyboard. I just want someone to help me and tell me where the coloured wires should go to on the back of the keyboard? ON PANASONIC CCTV: Data Transmission: Red: T (B) Orange: T (A) Data reception: Yellow: R (B) Green: R (A) SAMSUNG SPC-1010 PTZ KEYBOARD Tx1: - + Tx2: - + Tx3: - + TRx: - + Thanks Adam Link to comment https://www.thesecurityinstaller.co.uk/community/topic/33486-panasonic-wvcs574-hard-wired-into-a-samsung-spc-100-help/ Share on other sites More sharing options...
james.wilson Posted October 8, 2012 Share Posted October 8, 2012 Have you tried address 0 for the cam. Different pelco protocols (i assume your using that) use 0 or 1 as the cam 1 securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/33486-panasonic-wvcs574-hard-wired-into-a-samsung-spc-100-help/#findComment-291766 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.