clivedunn Posted November 19, 2007 Share Posted November 19, 2007 Good Evening I have an AJ400 bell box which I want to connect to my new Response SA5 wireless alarm. The connections on the bell box are: +, - , sw , return. The connections on the sa5 are switched 12v dc output for wired siren GND and OUT, Tamper circuit for wired siren GNd and Tamp, also permanent 12v dc and signalling relay contacts (volt free). Can anyone advise? Regards Link to comment Share on other sites More sharing options...
magpye Posted November 19, 2007 Share Posted November 19, 2007 Nothing to do with alarms, but, my father was in the same PoW camp, Stalag IIIa in Austria, 1941-45 as Clive Dunn aka Cpl Jones from Dad's Army. Sorry about that I could not resist, not you by any chance? Someone told me I was ignorant and apathetic, I don't know what that means, nor do I care. Link to comment Share on other sites More sharing options...
FASTCAR Posted November 19, 2007 Share Posted November 19, 2007 Hi , I'm not familiar with either....but try this , preferably before you screw it to the wall. bell . . . . panel + . . . . V+ - . . . . GND SW- . . . . OUT RTN . . . . TMP Regards. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.