Jack b

Its a bit of an odd box i think. Its not very loud either but maby thats why you always see three or more on a building .

On the main pcb board it has toplok uk so i assume the bell box is a Toplok box.

Can any one help me with identifying a few of these terminals on this old ADT box. PID and anti drill. Also does the tube markings mean i can have an extra xenon tube for an inside flash if someone were to get inside the box?

How come?

Ill just stick one in anyway, i think it'll look nice.

Has anyone ever seen an aritech AS293 with a comfort LED?

End of the line batterys i think there called Here i go again....

I sorted it out. Turns out you need a 12v battery at the end of the loop.

Is that an afa and a banham in the background?

Does anyone know how to wire this panel?

I've got the panel bulb working and the buzzer for exit timer working. The bulb only lights up if you've put something in the bell terminals. I can't get the circuit fault to extinguish. I've tried making loops but that didn't work.

I need help on wiring this panel so that the circuit fault bulb turns off and I can set the panel.

In all seriousness what do kerry springs even look like? The reason I'm asking is because I've made a panel for the Rely-A-Bell I picked up and It needs some way of sounding the alarm through the panel. I know door contacts work but I need something a bit more authentic.

How would I hook it up to a panel?

Does anyone know what a kerry spring is and how to make one?

The thing at the top is a pygmy bulb

Does anyone know whats inside a securicor alarms?

I bought this rely a bell and while ago and I've wanted to make a panel for. I know how to make the coffin panel from the 50s rely a bell system but not the 60s rely a bell system. If anyone has info on the 60s or 70s rely a bell coffin panels or picture then notify me.

Your probably right

It's probably the solder joints on the board.

My first panel was a Selmar Burglar Alarm from 1975. The bell box was hammered black and only had a synachrome bell inside. The panel was hammered black and a circuit test button with a green incandescent lamp under the button. Next to the button there's a key switch with a red lamp under it. Round the side of the control unit was a flick switch and next to it was a xenon lamp. It was very simple only having two relays , mains and a micro switch.

I used to have one of those panels. It was 6 zone instead of 4 zone.

What's a iirc speaker? A mylar cone speaker or something like that

Does it have the same guts as the bentley classic sounder?