[Enforcer v.10 Test Communications Query]

1 minute ago, Amps said:

Just to add the app will auto log you out after 5 minutes.

I didn't know this - nice security feature.

I am aware that setting the alarm from the App overrides the programme volume, which I'm not sure is a feature I like... But overall very happy with the product and its connectivity ☺

[Enforcer v.10 Test Communications Query]

1 hour ago, Amps said:

As far as I know you cannot test the App this way. The only way is to do a “live” test by setting then activating the alarm. Make sure you are logged out of the app otherwise you will not receive the alarm notification.

 

You can test whether or not the panel is communicating with the cloud/app using the Diagnostic > Communications menu.

Many thanks Amps, that clears that one up!

Thanks all for the help.

 

 

[Enforcer v.10 Test Communications Query]

2 hours ago, james.wilson said:

don't know the panel, but os test comms for testing proper comms, not the app?

Hi James,

 

I do recall reading something similar in the Manual, and thought I'd selected the one to test the App, but maybe I pressed the ARC one instead? I'll check when I get home later and post an update.

[Enforcer v.10 Test Communications Query]

Hi all,

 

Hope you're well?

 

I'm in the engineer menu of my Enforcer with WiFi module. I have the HomeControl+ app installed on an iPhone and Android. I'm pressing the 'Test Communications' option but nothing is happening on either device...

 

I am able to use the App as normal on both devices. One user is set up to receive Arm/Disarm notifications which seem to work fine.

 

Does anyone have any idea what may be the problem?

 

Thanks in advance

 

[Part set Enforcer?]

23 minutes ago, Amps said:

 

You mean in System Options flexi set was turned off?

Im sure the default is flexi set on. Did you turn it off?

 

Glad you got it sorted.

I think the main problem is that I was inputting the master manager code instead of the user code (which wasn't set), but once I added a user, set user parameters for zones A and B, it worked.

 

But don't tell anyone that I was that stupid ;-)

[Part set Enforcer?]

2 hours ago, Simlec said:

Have you enabled flex set for that user?

You have to enable flex set globally and then for each user.

im not sure if it's needed as I always have one set, but you may need a zone setting as FX or ER

You also need zones assigned to area A & B to uses areas A & B !

This was the problem!

 

I thought 'Flexi Set' was a global option only, and whatever you set it as using the Engineer Code would be a global thing, but apparently not.

 

Thanks for this, and thanks to everyone else on the thread for taking the time to help me with this issue, your experience and expertise has been greatly appreciated.

[Part set Enforcer?]

1 hour ago, Amps said:

Only other thing i can think of and not sure if it will make any difference. Do you have a final exit zone for area B?

Yes, it has a final exit. I even tried changing this to entry/exit route just to see if it made a difference, but still didn't.

1 hour ago, al-yeti said:

Thought b was part set , or is this like the scanny abcd 

Yes B is part set, although it has no inputs assigned to it at first so it has to be done manually.

[Part set Enforcer?]

No idea what the problem is. I've checked inputs are assigned to the Zones in question, I've enabled flexi set, I've done everything that I can possibly think of, plus the advice given on this thread. I've initiated a clean start, still no fix.

I can only assume that there's some kind of fault with the system until Pyronix get back to me.

 

Thanks for all the advice so far. Will update when I hear back from Pyronix.  Any other suggestions more than welcome in the meantime ;-)

[Part set Enforcer?]

11 hours ago, Amps said:

If you can set areasa A & B with the engineers code it suggests to me that the system is programmed correctly. I'm thinking the issue is with the code you are using. Try setting up another user code for area B only.

I've obviously done something wrong with the inputs or something because I'm only able to assign Zone A to a user. I'll go and have a look...

[Part set Enforcer?]

1 minute ago, Amps said:

If you can set areasa A & B with the engineers code it suggests to me that the system is programmed correctly. I'm thinking the issue is with the code you are using. Try setting up another user code for area B only.

Good idea. Hadn't thought of this. Will try and get back to you.

[Part set Enforcer?]

2 hours ago, al-yeti said:

I think what amps is saying your missing something, unassign and go through it again , as he says if b is not highlighted , one of the steps is missing 

 

Assign all zones and see what happens perhaps 

 

I wonder have you only tried one zone?

I will definitely try this tomorrow.

 

All zones were assigned originally, but I still couldn't select to set Zone B when I entered the user code.

 

I definitely only have the one code as I tried deleting all users and trying again to no avail.

 

I've definitely done something wrong regarding zones. Do you mean zones as in A, B, C and D or zones as in Sensors?

 

I presume you mean A, B, C and D in which case, I have been into these and amended the parameters to what I want, but it still would not let me. I had A and B as full and part set respectively, and C and D as unused.

 

Thanks all for sticking with me through this, it's greatly appreciated!

[Part set Enforcer?]

8 minutes ago, Amps said:

Ok. I don't know. 

Ok, many thanks for your help and time.

I've asked Pyronix so will post back here when I get a reply.

[Part set Enforcer?]

29 minutes ago, Amps said:

Have you any zones programmed for Area B?

Yes, the same as Zone A apart from the upstairs sensors.

[Part set Enforcer?]

1 minute ago, Amps said:

Is Area B assigned to the user code?

 

I think you are presuming that both the A & B keys will be highlighted when you enter your code. This is not always the case.

 

Enter your code and the A key is highlighted. If you press the B key is that highlighted?

 

 

Thanks for the quick reply.

Yes Area B is assigned to the user code.

 

If I enter the code, A is highlighted only. If I try to select B, A remains highlighted but B still doesn't come on.

[Part set Enforcer?]

7 minutes ago, Amps said:

 

An Enforcer part set is Area B.  Go to Assign Keypads/Readers -> Keypad 00 and assign Area B to it.

Hi there,

Thanks for your reply. I went here and it was already assigned to all zones. However, I set it to A and B, but this hasn't worked :-(

[Deltabell W-E comfort LED's]

19 minutes ago, al-yeti said:

I assume wireless was part of kit

Yes this came with the kit

[Deltabell W-E comfort LED's]

5 minutes ago, al-yeti said:

What model is it in? I think SCB mode you would but you could stick a wireless as additional on the enforcer rear of property of other is on front 

 

But charging current would do two I think in SCB mode

Front is SCB. Rear is just set up as standard Wireless Bell, but with the addition of running power to it for the Comfort LED's. (I thought this would make the Comfort LED's function better, but it appears I was mistaken lol)

[Deltabell W-E comfort LED's]

1 hour ago, al-yeti said:

Fit the X in SCB mode with lamp

If it's with a mini panel of sorts 

I have an illuminating Bellbox on the front. Do you think I'd get away with another on the system, or would that be too much?

[Deltabell W-E comfort LED's]

Slightly disappointed with the Comfort LED's on the Deltabell W-E. Very dim and irregular flashing.

 

I understand this is probably to conserve batteries, but I'd have thought it could be overridden by supplying power to the Bellbox.

 

Oh well. Small price to pay, I suppose.

[Part set Enforcer?]

3 minutes ago, al-yeti said:

I fixed an enforcer once , he asked me about part set , his part set was like setting full set and panel was upstairs so never got round to finding out why the B key doesn't part set 

 

I still don't get it lol

Lol! As long as I'm not the only one!

[Part set Enforcer?]

24 minutes ago, datadiffusion said:

I find a lot of people esp. domestics using a slightly more commercial panel, often choose Areas to try and achieve what most of us would just use Part for.

I think this is what I'm doing (or trying to do).

 

I couldn't actually find the designated 'Part Set' option, and having the PIR's respond differently in different zones was the only way I could think of getting the same effect.

 

Unless I missed the part set option?

[Part set Enforcer?]

Just now, Amps said:

Have you enabled the keypad for area B?

No I don't think so. Do I have to do this even though I'm not using an RKP?

 

I don't recall seeing this option but I'll have a look when I'm home from work.

[Part set Enforcer?]

12 hours ago, Simlec said:

Enter master user menus (press D then enter your master user code)

You can then change user areas under change codes menu

Hi,

 

Thanks for your reply.

 

I tried this but nothing happened. The 'A' button remained illuminated and it wouldn't allow me to select 'B'.

 

It's version 10.

 

Thanks in advance.

 

[Part set Enforcer?]

29 minutes ago, Simlec said:

Do you mean areas A, B, C or D and your user code only allows you to set A?

If so you need to enable set/unset area B for that user code.

 

I did wonder this, but is this an option on the enforcer? If so, how? I can't see anything in the manual, and when I went into 'Codes and Users' in the engineer menu, I saw no option for doing this.

 

I'm wondering if I'm trying to do the wrong thing? I've set a 'part set' as Zone B and then when I want to only 'part set' (i.e at night), I want to be able to select Zone B when I put my user code in. Is this right?

[Part set Enforcer?]

Hi all,

 

I'm having trouble part setting my Pyronix Enforcer panel from the user code.

 

When setting the alarm with the user code, it allows me to set Zone A only. It won't let me set Zone B.

 

If I set from the engineer menu, I can select either Zone A or B.

 

I have flexi set enabled for the user.

 

Anybody know where I'm going wrong?

 

Thanks in advance.