jjohn

well this is why im here asking these questions and showing photos of the equipment!

greetings, i have to quote to replace a menvier control panel which was once on redcare but bells only now. the keypad appears to be exactly the same as a mevier m800 series panel, there is what looks like one of menviers node expanders next to the panel and the zone list is numbered as zones 0001 to 0006 which i assume is wired off the panel and zones 2011 to 2018 which i assume are zones wired from the expander next to the panel. i have not opened the panel. can i also assume that this is not an id biscuit panel? it would be handy to assertain this before i quote to fit with a standard double pole eol panel. i have attached a library picture of keypad and node. thanks.

i use a dewault 18v for fixings stuff up with but have a 36v sds drill for big work. sds drill is erbauer from screwfix at £250, dont know how long it will last but its been ok for 4 months, however the smaller 18v erbaur drill i bough broke so i replaced it with the dewault version.

thank god id is finally gone, I used to have to install id systems, old company I worked for had thousands of commercials wired id, wont bother them much though as they will just charge to upgrade their old systems to eol.

a bit of sub contract work would benefit me .