rajbps
-
Posts
36 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Everything posted by rajbps
-
From the album: raj
-
From the album: raj
-
From the album: raj
-
From the album: raj
-
From the album: raj
-
i have it on cc its option 21 then 0 21: Zone Configuration This command enables you to select the wiring type of the zone connectors on the control unit PCB. The default is option 0 for all models. 0 Up to 8 closed circuit loop zones (CC + Com A/T). 1 Up to 8 fully-supervised loop zones (FSL 2K2/4K7). Is the wiring right. I done it as it says in the book
-
I upload proper pics shortly. But thats how its connected.
-
From the album: raj
-
so should i disconnect the tamper from the pir and box?
-
anyone with any ideas pls
-
Its DP and the program is 03 normal alarm. I did a 98 before to reset the system to default. Then disable all the rest so from zone 04 to 08. , Raj
-
Hi guys, I am new to alarm. I recently bought a second hand cooper menvier 9651 and installed it. I followed the manual and the instructins on http://www.thesecurityinstaller.co.uk/community/topic/29401-cooper-menvier-9651/page-2 were very helpful. I seem to have one issue. When i put power to the system, i am unable to exit installer mode. It keeps saying the zone1,2,3 tamper. Can anyone help on this pls. , Raj