rajbps

Hi Team, I got this box from ebay and then got the keypad from a different person again off ebay. i managed to get the manual but having problems to connect the pir. Can anyone advise pls. I

Hi Guys, I got this box as second hand and it did not come with a manual or anything. Does anyone knows exactly what model this is pls?

Ok well I was just trying my luck by the way thanks to everyone for all their help everything is working fine sure i still have some setting questions but i read the installer manual and then if needed i ask the question. , Raj

Ok, will do and report back hopefully all good news ) another thing if I may, is there a way to link this product to ethernet so you can get notification if the alarm been triggured.

Sorry forgot to upload the pic for the door contact. The red and black should it go to the cct(number) and the yellow and blue is the tamper one correct? , raj

ok success on. pulled everything to a table and started to test. Comes out to be the spring on the tamper switch on the pir was not getting pressed properly in any of the 3 devices. Unit going off installer mode now ) A second question if I may, does anyone know how to install a door detector pls. Here is a pic of what I have. Now to what I understand the yellow and blue one is the tamper. The red and black do they go to a zone or to power 12vand 0 not sure. My bet, goes to a zone and I break the serial link on the tamper loop and add this one as the same in serial. Am i correct? , Raj

Hi everyone thanks for all the replies. I have got the system rewired with 8 core alarm cable. Unfortunately again same zone 1 , 2 , 3 tamper . I get a meter tomorrow and try again. Can anyone tell me what volts should i get on the tamper loop. , Raj

so if i get the right cable and with the current wiring should it work

yes its cat 5 Do you think its the cat 5 cable thats the issue?