Shaunb1905
-
Posts
192 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Posts posted by Shaunb1905
-
-
They will never be able to police this. Will only come about when you try sell your house surely?
-
Remember a few years ago, customer called us out because their alarms bleeping. Was someone’s hair straighteners, which were left switched on!!
-
Is it not zone 200? Output group 199?
-
Easy enough to do through programming
-
It’s seems daft to me when you think that the cables in the panel like the zone, loops, sounder circuits etc are close to the mains cable and connections
-
Travel distance doesn't seem to be more then 45m or reduced to 25 for special hazards?
-
As above
A lot of the time I find L3s can be very similar to L1 depending on the layout so I just go L1 anyways
-
What’s the issues?
-
Is that what they charged him or he’s trying to charge you? Have you counted the devices or have you seen the certs? Only asking because if, like you say you have a suspended ceiling, they may have installed detection or even a smoke beam above?
-
Morning chaps. Does anyone have any idea where to get one of these from?
Thank, Shaun
-
Are they integrated or ancillary base sounders?
-
Hello, A Dell for me
See what I did there?
-
1 minute ago, ElecTech said:
Yeah it is specialist, its almost like a blast freezer, I don't believe staff are in there when it goes down to those levels but regardless the sounders will need to be present when they are inside at say -20c.
Yeah I'm sure that would work but cant find the sounder capable. What's a PSI by the way?
Having not been to site I'm interested to how its wired as just been checking the FP200 spec & that's only rated down to -20c.
I will update once I know more.
I meant PSU sorry
-
I'm sure they're is a conventional sounder capable, so just stick a sounder controller on the loop (psi needed) and good to go
-
Usually they try pass it on to their Electrician to try and do
-
1
-
-
We've got generic ones that gets changed to suit the job.
-
Sounds like there is more to it, too me
-
Protec's are known for **** power supply's!
-
Change it for adressable and put multi sensors in and set up cause and effect, day and night mode?
-
Lots of issues with twinflex! Agree about alarmsense, great bit of kit
22 minutes ago, sixwheeledbeast said:We didn't know what the property was from the OP.
Yes, I have serviced many a fire alarm in domestic properties, however all have been detached properties of various sizes.
Mr. H hits the nail on the head as usual, should really be mains interlinked.
Mains interlinked would be installed with 3C&E mains cable.
Would use Alarmsense over Twinflex, DD.
-
Must be mental using twinflex!!
-
1
-
-
8 hours ago, MrHappy said:
£1 an hr & a mars bar if they work hard....
Fun size Mars bar??
-
15 hours ago, james.wilson said:
as an audi fan I think vw vans are poor, I'm looking at an nv200 or a connect next
New connects are very very good!
-
1 hour ago, MrHappy said:
Cash 4 Windows
Alarm Master
Alarm Tracker
Winsims
Are software for fire & security co's
Click is general contractor software which may be suitable for a fire & security co's
System 8 was targeted at fire extinguisher co's ?
If you don't like alarm master, speak to mentor
Yeah it does fire and security alarms also
New Scottish law on interconnected fire alarms
in Guest Forum
Posted
Just stick some grade F, Aicos in. About £50 each. Job done