Hi all,

Visited a house last week with camera trouble they have installed a home network system (http://www.homenetworksciences.com)

Installers charged a whopping figure for installation of this unit which controls TV points, computer network points, phone points and CCTV back to a network hub (http://www.homenetworksciences.com/pdf/cctv%20insert.pdf)

They had trouble from day 1 with the CCTV then the installer washed his hands of it. When I tested the PSU it was dead so I replaced the PSU and bingo.

There was only one PSU Voltek 1.25 Amp powering 4 Way camera switcher, TV modulator and 4 Voltek CT 120 Cameras (SuperCam 1)

So I replaced it with two 1 amp PSU

Ring Voltek, i cant remember the guys name there (Dave maybe?), i dont see how a Voltek set up and DVR wont be compatable, all you would need are are the right connectors i would think.

I dont use a lot of Voltek kit but what i have used i find ok for the price. I currently have a Wireless camera/monitor linked to a DVR via its Monitor output, it works fine.