Guest Posted June 3, 2005 Share Posted June 3, 2005 Ah, that's one of NTL's addresses. Somethings gone awry somewhere. It's a combination of XP being thick and ICS being **** at the best of times. Time to buy a router I think, much easier solution. Link to comment Share on other sites More sharing options...
Security Technician Posted June 3, 2005 Author Share Posted June 3, 2005 ok i will take your word for it mate, therefore any recomendations for router? i have a 25m and 30m cable ready to pull in once sorted as both machines in same room at the mo Link to comment Share on other sites More sharing options...
Guest Posted June 3, 2005 Share Posted June 3, 2005 Deja vu? Haven't we done this before? Link to comment Share on other sites More sharing options...
Guest Posted June 3, 2005 Share Posted June 3, 2005 You should no youre in the matrix theres that black cat again! :!: Link to comment Share on other sites More sharing options...
breff Posted June 4, 2005 Share Posted June 4, 2005 I assume the modem connects by rj45 if you have NTL, if so connect broadband router to cable modem, connect pc and laptop to router, connect to router with desktop machine and tell router to clone mac address. Set up desktop and laptop to recieve an ip address automatically. You should then be in business The opinions I express are mine and are usually correct! (Except when I'm wrong)(which I'm not) Link to comment Share on other sites More sharing options...
Security Technician Posted June 5, 2005 Author Share Posted June 5, 2005 modem connects to desktop via usb Link to comment Share on other sites More sharing options...
Guest Posted June 5, 2005 Share Posted June 5, 2005 Does the modem also have a RJ45 10\100 network connection? If so you just need a router with ethernet WAN and LAN ports. You can then connect as many PC's as you want to it then and it's not a headache every time. Link to comment Share on other sites More sharing options...
Security Technician Posted June 5, 2005 Author Share Posted June 5, 2005 yes it has, i have a router a friend gave me, it is a d link dl-524 wireless router, i plugged the cable i tried it but didnt get the wan light to say internet connected, in instructions it says you have to open up internet explorer and connect to routers ip address but couldnt get it to do it, what cable should i use from modem to router? cross over or normal? the router comes with a cable also and wireless lan card etc Link to comment Share on other sites More sharing options...
Guest Posted June 5, 2005 Share Posted June 5, 2005 Could be a duff cable. Should work with either straight or x-over. Before you start, default the router as the IP address could have changed. Also, do the config via a cable on the LAN side before conecting up the rest of the wires. Link to comment Share on other sites More sharing options...
Security Technician Posted June 5, 2005 Author Share Posted June 5, 2005 Followed instructions on screen but no wan light for connection and tried 2 or 3 cables Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.