Guest Souljim Posted April 26, 2005 Share Posted April 26, 2005 I recently had a problem with my alarm system (Veritas R8 Plus) after a bulb blew and tripped the fuse. On resetting the fuse I noticed zone 1 was lit on the keypad and the keypad itself was completely dead (the bellbox light was also flashing but no alarm sounding). I've since managed to get the keypad working zone 1 is no longer lit and the light on the bellbox is no longer flashing. In the process though I've activated the tamper so cannot now set the alarm. The original installer is unfortunately not welcome after upsetting my wife on an earlier late night visit when we had a problem so I'm not sure what to do. Any advice would be very welcome. Souljim Link to comment Share on other sites More sharing options...
Guest Posted April 26, 2005 Share Posted April 26, 2005 Post your location, someone nearer to you may be able to help. Dave. Link to comment Share on other sites More sharing options...
j.paul Posted April 26, 2005 Share Posted April 26, 2005 I recently had a problem with my alarm system (Veritas R8 Plus) after a bulb blew and tripped the fuse. On resetting the fuse I noticed zone 1 was lit on the keypad and the keypad itself was completely dead (the bellbox light was also flashing but no alarm sounding). I've since managed to get the keypad working zone 1 is no longer lit and the light on the bellbox is no longer flashing. In the process though I've activated the tamper so cannot now set the alarm. The original installer is unfortunately not welcome after upsetting my wife on an earlier late night visit when we had a problem so I'm not sure what to do. Any advice would be very welcome. Souljim 50491[/snapback] Sounds like another panel with a battery problem As DNS Says Post your location, someone nearer to you may be able to help. There are no stupid questions, but there are a LOT of inquisitive idiots. Link to comment Share on other sites More sharing options...
Guest Souljim Posted April 26, 2005 Share Posted April 26, 2005 Sounds like another panel with a battery problem As DNS Says 50496[/snapback] I live In Hull. Checked battery which seems fine. I'm guessing the system needs resetting and can only be done if I have the original engineers code. Link to comment Share on other sites More sharing options...
housty Posted April 26, 2005 Share Posted April 26, 2005 I live In Hull. Checked battery which seems fine. I'm guessing the system needs resetting and can only be done if I have the original engineers code. 50505[/snapback] Hi Mate you probably wont get a hold of the engineer code from the installer.Best bet is to ask someone to come and have a look at it housty Houston Security Systems Ltd Intruder alarms CCTV Door entry Fire protection Networking SSAIB Approved Link to comment Share on other sites More sharing options...
Guest RICHL Posted April 26, 2005 Share Posted April 26, 2005 Checked battery which seems fine. 50505[/snapback] How did you check the batt Souljim? Link to comment Share on other sites More sharing options...
Guest Souljim Posted April 27, 2005 Share Posted April 27, 2005 How did you check the batt Souljim? 50534[/snapback] My brother checked the battery. He's a NICI registered electrician so I assume he knows what he's doing? Link to comment Share on other sites More sharing options...
Guest Posted April 27, 2005 Share Posted April 27, 2005 My brother checked the battery. He's a NICI registered electrician so I assume he knows what he's doing? 50648[/snapback] Not neccesarily...... Your best bet would be to get an engineer out to it as it could be several things. A decent service never goes amiss anyway. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.