Guest sjbuck Posted September 13, 2003 Share Posted September 13, 2003 What a great website, and so many manuals! Unfortunately the alarm in my house is a gardtec 360/580 and there doesn't seem to be an installer manual on the site. does anybody know where I might be able to obtain one? Also, how do I tell if I have a 360 or a 580?! (presumably very easy to tell if you know what you are looking for?! ) Many thanks. Steve Quote Link to comment Share on other sites More sharing options...
Service Engineer Posted September 13, 2003 Share Posted September 13, 2003 It cant be a 360 because their isnt one, so im pressuming you mean a 350/370 or 580. Simply though the 580 control panel has a sloping front where the keypad and display is located, the 370 control panel is a smaller box about 10"x8" and doesnt slope. Here`s the manual. Gardtec_370_581_582_User_Guide.pdf Quote ........................................................ Dave Partridge (Romec Service Engineer) Link to comment Share on other sites More sharing options...
Guest sjbuck Posted September 18, 2003 Share Posted September 18, 2003 Hmmm. The paper manual that I have says "Gardtec 360/580" on the front of it, I would assume it's the 580 due to the number of zones but I can't be sure. Is there an engineers manual for this? I haven't been able to find one. Thanks for the quick reply Quote Link to comment Share on other sites More sharing options...
Service Engineer Posted September 18, 2003 Share Posted September 18, 2003 And here`s the 350+ Quick start user guide. Gardtec_350_User_Guide.pdf Quote ........................................................ Dave Partridge (Romec Service Engineer) Link to comment Share on other sites More sharing options...
Guest sjbuck Posted September 20, 2003 Share Posted September 20, 2003 Thanks again for the quick response, the manual will come in very useful B) Quote Link to comment Share on other sites More sharing options...
FASTCAR Posted September 21, 2003 Share Posted September 21, 2003 Hi, I remember fitting a 360 , think it had an ex/ent zone from the RKP , quite handy. HTH. Quote Link to comment Share on other sites More sharing options...
cgs11 Posted May 21, 2014 Share Posted May 21, 2014 It cant be a 360 because their isnt one, so im pressuming you mean a 350/370 or 580. Simply though the 580 control panel has a sloping front where the keypad and display is located, the 370 control panel is a smaller box about 10"x8" and doesnt slope. Here`s the manual. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.