Hello all,

 

Hoping for some help with my Powermaster Visonic 10. 

I have a series of error messages on the control panel so I cannot arm it at the moment.

I get "not ready - trbl", with the messages showing "S.Motion 1 way" and "S.Motion missing". I have tried cycling through the errors but that doesn't clear it, and I cannot arm it to clear either.

 

Have noticed that the red sensors on the PIR sometimes flash when around the house despite the alarm being off.

 

Any help would be greatly appreciated!

 

Cheers,

Rob

The device in question has had a comms issue and then probably drained out.

If you have a maintainer it's something to contact them about.

It will not clear or arm as the device is missing, the panel can't contact it.

Thanks @sixwheeledbeast  

will have to contact the maintainer then. Doesn’t look like it’s something I can reaolve myself! Cheers