Skip to content
View in the app

A better way to browse. Learn more.
Security Installer Community

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Dahua Cameras fault "Abort" and "Startup"

miaren
in CCTV & Access Control

Featured Replies

Anybody else suffering with Dahua IP Cameras rebooting very repeatedly...?

 

Currently trying to configure one for a Job, and noticed repeated rebooting. Initially replaced the PSU, then tried POE but still occuring...

 

Checked 2 other cameras that have been working well for many months and noticed both started a similar pattern this morning..

 

Logs show

Abort, Startup then Hot Swap...in that order.

 

My initial thought was a dodgy SD Card, but not all have Edge recording

 

Bit confused as to whats going on and what has caused it to occur...?

Not got any issues as yet, got quite a few out there now 

 

infact we are finishing off a 60 cam install at the mo, no issues as yet 

 

mixture of wedge cams and bullets 

  • Author

Tried defaulting the new camera and one of the original cameras and the issue is still occuring...?

These must be conflicts or something? 

 

Unplug and try one at a time?

  • Author

It does appear to be some sort of conflict... When not connected to router, seems to be more stable and doesnt want to reboot..

I should have explained the cameras mentioned were on a separate site 8 miles away

You got the switch in the correct range? 

  • Author

Checked the switch range - all ok, but now sorted with a Firmware Update.... Very interesting that 2 cameras that were working well, went wrong on the same day...

Create an account or sign in to comment
Go to topic listing

Recently Browsing 0

  • No registered users viewing this page.

Important Information

By using this site, you agree to our Terms of Use.

I accept

Account

Navigation

Search

Search

Configure browser push notifications
Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.