smashwings Posted April 2, 2016 Share Posted April 2, 2016 Hello I have wired DSC PIR sensors and would like to know if they will work if I wire them to another alarm brand panel, like Scantronic or Ademco. Thanks These are the sensors Link to comment https://www.thesecurityinstaller.co.uk/community/topic/39958-dsc-pir-sensors-can-be-used-with-other-alarm-brands/ Share on other sites More sharing options...
ElecTech Posted April 3, 2016 Share Posted April 3, 2016 Do you know what model they are, just having a quick look on there website and seems they have an addressable PIR which is daisy chained on a data line. Chances are it just a case of switching the resistors - resistor value depending on which panel your going to use - that's if it's using EOL (end of line) wiring. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/39958-dsc-pir-sensors-can-be-used-with-other-alarm-brands/#findComment-443926 Share on other sites More sharing options...
smashwings Posted April 3, 2016 Author Share Posted April 3, 2016 Hello, I've just bought the house and having now taken out the sensors to realise that they are wireless WLS904PL, so will only work with the DSC main panels, I tought the main panel was removed in the past but found it despite owner didn't know where it was. I'll try to program it so will ask any doubts in other posts, thanks Link to comment https://www.thesecurityinstaller.co.uk/community/topic/39958-dsc-pir-sensors-can-be-used-with-other-alarm-brands/#findComment-444019 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now