mervzila Posted November 16, 2013 Share Posted November 16, 2013 Last week I was called to a site which was having problems with false alarms. Approx 4 mins after the system was set it would activate. The fault events showed an activation from a wireless detector and from another wireless zone - a viper. This other zone displayed "ch0v" ? The wireless zones showed 10/00 in the zone readings and the rf portal showed 100% comms. Any ideas would be apreciated. Thanks. Link to comment Share on other sites More sharing options...
lamplight73 Posted December 5, 2013 Share Posted December 5, 2013 Something is getting an earth fault/ abnormal volts Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.