Guest riston Posted August 2, 2003 Share Posted August 2, 2003 Hi Guys I have recently moved to a new house where the previous occupier paid handsomely for an ADE Accenta Mini G3 Alarm System to be installed. Usual case of no operator/engineering manuals, I have today downloaded the appropriate PDF's for both of these, reset the Engineering code etc. The problem is that I wish to fit remote door openers to the garage doors (flash git!!). The garage currently has a twin tech sensor, which I planned to ditch and re-place with contacts on the individual 'up and over' garage doors and to complete the task I planned to place a Remote Keypad in the Garage to arm/disarm as required. No problem I thought, until I have just discovered that the maximum programmable entry time appears to be 30 seconds, although my girlfriend relishes the challenge of opening the door and dis-arming the alarm is 30 seconds, before the siren starts whaling, I'm not so keen!! Is 30 seconds a typical maximum entry time for a modern alarm panel? What's the usual practise for alarm installations in this instance? Do I need a new alarm panel? My girlfriend thinks that she's already fixed the problem, just alarm the garage/house integral door and leave the garage unalarmed. Yeh right, I wonder if she'd be so keen if I started keeping her jewellery boxes in there?? Any thoughts welome. Regards Riston. Link to comment Share on other sites More sharing options...
Service Engineer Posted August 17, 2003 Share Posted August 17, 2003 The min/max entry/exit time on the G3 panels is 10 to 990 seconds. When you programme the time`s into the panel dont forget you need to divide by 10, so 30 seconds would be 03, 90 seconds would be 09, 990 seconds would be 99, etc etc. ........................................................ Dave Partridge (Romec Service Engineer) Link to comment Share on other sites More sharing options...
paul fae kings Posted September 3, 2003 Share Posted September 3, 2003 you could always wire garage dualtech via relay thru light on opener. So when u open door pir is overridden for period light is lit.Not sure of nacoss rules on that though.Works for me though. tell u how if req Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.