south_side Posted November 28, 2011 Share Posted November 28, 2011 Hi Guys Just replacing an old Scanny with a current model but I'm have issues with connecting the bell. In the old control panel I had; Trig+ Trig- 0v TR and I had a wire connecting to the 12v Aux connector, where the pir's where taking power from. In the new panel, I have 12v Bell Strobe 0v TR The Bell box has no strobe Anybody tell me how I should wire the bell box up to the new panel please? Thanks Link to comment Share on other sites More sharing options...
Rulland Posted November 28, 2011 Share Posted November 28, 2011 12v=and I had a wire connecting to the 12v Aux connector, where the pir's where taking power from. Bell=trig- TR=TR 0v=0v And you will require a loop from 12v+ to trig+ Link to comment Share on other sites More sharing options...
south_side Posted November 30, 2011 Author Share Posted November 30, 2011 Many thanks Rulland I will try over the weekend and reported back Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.