Jump to content
Security Installer Community

Cooper Menvier 9651


username1

Recommended Posts

Hi All, would appreciate it if someone could help me out.

I have one of the above control panels installed with 6 PIR's and cant find the original guides.

Q1 - Currently everyone uses the same code and i would like to change this so different users can have different codes, could someone give me direction on how to do this please.

Q2 - We currently have 2 programs, A - all systems set and B - Bedtime (landing omitted), i would like to add a third © which would set all PIR's except the garage, again could some one give me direction on how to do this.

Q3 - i would like to change the exit/ entry route for all programs, to allow us to use the front or rear door, as we use both to come in and out. again is this possible and can someone tell me how to do it.

Thanks in advance for any answers received.

C

Link to comment
Share on other sites

A1, look here....http://www.coopersecurity.co.uk/products/productsindex.aspx?intProductID=182&intTab=3&intProductCategoryID=37

A2 and A3, you need to have engineer access to do this.

The opinions I express are mine and are usually correct!

(Except when I'm wrong)(which I'm not)

Link to comment
Share on other sites

A1, look here....http://www.coopersecurity.co.uk/products/productsindex.aspx?intProductID=182&intTab=3&intProductCategoryID=37

A2 and A3, you need to have engineer access to do this.

Thanks for that, have sorted out the first question with your help.

i can get engineers access, would appreciate any help you might be able to give me.

Thanks

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.