drosco Posted May 10, 2011 Share Posted May 10, 2011 Hi guys, new to the forum. I am not a qualified security installer so excuse my ignorance. I have invested in a new alarm and sounder. Scantronics 9651 and Elmdene HS 500/m. Wiring semmed to go ok but have hit an issue with tamper problem to bell which i can not seem to get rid off. I know there are 2 tampers in the sounder, on the back plate and the cover, am i missing a tamper or have i to do something back at the panel? Any assistance will be appreciated. Thanks Link to comment https://www.thesecurityinstaller.co.uk/community/topic/31605-scantronic-9651-to-elmdene-hs500m/ Share on other sites More sharing options...
9651 Posted May 11, 2011 Share Posted May 11, 2011 With a multimeter check at the panel for 12v on tamper return, that will tell you if the bell tampers are settled. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/31605-scantronic-9651-to-elmdene-hs500m/#findComment-273240 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.