Ive got a door access kit that has a power supply, panel and phone (art427), Ive been asked to combine it with a phone dialler (art380).

They want the push button to dial a number, there is no lock.

Is anyone clued up on theses? Or got a wiring diagram?

Thanks

All you should need is this, the 380.

Thanks, Ive already got this but it doesnt have the option of connecting the unit I have.

the unit I have is a single botton, and has only 4 connections 1 to 4

1 2 and 3 are speech and common. Its all there. 4 is the call IIRC, or it may be marked P1. Most Videx is almost the same.

You did ask for a diagram, use page 17.

Been a while since I saw one, but Videx did make a bleidin orrible 2 wire audio system. Could be one of them, otherwise I cant remember a front panel with only 4 terminals.

Whats the art No. on it ?

Favorite general purpose ones are 836 or 837

Edited November 8, 201015 yr by SUBS

Still do, the 380 has jumpers to accomodate this.

Dug this out from a old file, this should assist more.

Wasnt the 2 wire VX2000/VX2200, the former needed a laptop to programme.

Edited November 8, 201015 yr by Oxo

Still do, the 380 has jumpers to accomodate this.

Dug this out from a old file, this should assist more.

Wasnt the 2 wire VX2000/VX2200, the former needed a laptop to programme.

Think the 2200 was a video system, there was an audio one as well, with a concierge option but you needed about a 6mm thick pair.

Both were bleadin orrible, glad I dont still have to maintain the ones we put in. Last one was in Richmond...maybe somebody on heres got with it. lol

Edited November 8, 201015 yr by SUBS

If they have they can keep it !

If they have they can keep it !

Long as its clear that it wasnt us that cabled half of it in cat5 doubled up.. lol

pmsl