Dzim1000 Posted April 14, 2009 Share Posted April 14, 2009 Hi there, I have installed my speech dialler linked to an Accentra Optima Alarm, of course connected to the BT line via a provided plug. when i switch on the power it begins flushing oF sign. And as i programme it when i press 0 it goes back to flushing oF and no dialling tone is head. it sharing the socket with the phone. the phone is working well on both sockets so the socket is alright. i dont no whether my wiring is not correct but from the manual it looks alright. SOME ONE TO HELP ME PLEASE. Link to comment Share on other sites More sharing options...
Guest RJBsec Posted April 14, 2009 Share Posted April 14, 2009 Try programming in the telephone numbers you want it to dial. Link to comment Share on other sites More sharing options...
Dzim1000 Posted April 14, 2009 Author Share Posted April 14, 2009 Try programming in the telephone numbers you want it to dial. hi, as i try to programme/key in the number it quickly jumps back to flushing oFm, if the number has a zero on it. ideally i want it to send a message on the mobile phone if there is any breaking. I do not hear an tone on it. Taa Link to comment Share on other sites More sharing options...
Alarm Protection Posted April 14, 2009 Share Posted April 14, 2009 Sounds like you are not in programming correctly. ! Link to comment Share on other sites More sharing options...
fertilebert Posted April 14, 2009 Share Posted April 14, 2009 When programming you have to enter in the message number first , ie 1 fire 2 panic 3 whatever, then the telephone number the dialler is to dial , sounds to me you are trying to programme the number in the wrong field. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.