DamienGiles Posted August 5, 2008 Share Posted August 5, 2008 Hello! I'm not sure where to request this, but could someone tell me if they could supply (at cost, of course) the serial connector for the Gardtec dialler? (as taken from latest product guide): 04070 Serial Cable for direct connection of 04069 Speech Dialler to 800 series Link to comment Share on other sites More sharing options...
Guest anguscanplay Posted August 5, 2008 Share Posted August 5, 2008 can you still hard wire it - serial. using the comms terminals instead? Link to comment Share on other sites More sharing options...
Chorlton Posted August 5, 2008 Share Posted August 5, 2008 I'm having trouble sourcing this, panel is installed and "almost" ready to go but the normal supplier (sec ware) don't/won't stock.A. Have you tried e-mailing them and asking if they can supply and if so a price? Pound says they can & will if you ask. C. Link to comment Share on other sites More sharing options...
DamienGiles Posted August 5, 2008 Author Share Posted August 5, 2008 can you still hard wire it - serial. using the comms terminals instead? Angus, thanks for the reply. I can hard-wire it but apparently the system if connected via a serial connection into one of the ports of the board will allow for some additional control. I will wire it in via the 8core that I've got at the moment with a view to hopefully seeing what all the fuss is about with the serial connection later. Have you tried e-mailing them and asking if they can supply and if so a price?Pound says they can & will if you ask. C. Chorlton, love the avatar. I've sent them an email over a week ago. Their tel number simply states to email them. Any suggestions about an alternative (online?) supplier? Link to comment Share on other sites More sharing options...
DamienGiles Posted August 6, 2008 Author Share Posted August 6, 2008 Just got an email stating that it's now been added in as a stock item. Thanks for your help! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.