tupper Posted January 14, 2007 Share Posted January 14, 2007 Trying to fit an //.National Installer.// external bell box to my current system without any success. My previous system had four wires connected to the original bell box, a green wire which was connected into the original bell boxes - terminal, a red wire which was connected into the + terminal, a black wire which was connected into the sw- terminal and a white wire which was connected into the return terminal. The //.National Installer.// bell box has the following terminals H+, -H, RTN, -R, Eng, Batt, ST-. I connected it green to -H, Red to H+, black to -R, white to RTN (the battery terminal has a link wire from the siren) wihtout any success. Any advice greatly appreciated. Link to comment Share on other sites More sharing options...
camerabloke Posted January 14, 2007 Share Posted January 14, 2007 phone //.National Installer.// and ask them Eucam Security Systems 0845 4630 746 www.eucam.co.uk Link to comment Share on other sites More sharing options...
camerabloke Posted January 14, 2007 Share Posted January 14, 2007 hopefully not from my boosted van, from the other night Eucam Security Systems 0845 4630 746 www.eucam.co.uk Link to comment Share on other sites More sharing options...
stewymac Posted January 14, 2007 Share Posted January 14, 2007 Are you aware that all //.National Installer.// boxes in theory belong to //.National Installer.//?Where did you get it from? no they dont.. Link to comment Share on other sites More sharing options...
camerabloke Posted January 14, 2007 Share Posted January 14, 2007 Eucam Security Systems 0845 4630 746 www.eucam.co.uk Link to comment Share on other sites More sharing options...
JTP Posted January 14, 2007 Share Posted January 14, 2007 Link to comment Share on other sites More sharing options...
camerabloke Posted January 14, 2007 Share Posted January 14, 2007 just felt like banning smilie Eucam Security Systems 0845 4630 746 www.eucam.co.uk Link to comment Share on other sites More sharing options...
Guest Peter James Posted January 14, 2007 Share Posted January 14, 2007 Trying to fit an //.National Installer.// external bell box to my current system without any success. My previous system had four wires connected to the original bell box, a green wire which was connected into the original bell boxes - terminal, a red wire which was connected into the + terminal, a black wire which was connected into the sw- terminal and a white wire which was connected into the return terminal. The //.National Installer.// bell box has the following terminals H+, -H, RTN, -R, Eng, Batt, ST-. I connected it green to -H, Red to H+, black to -R, white to RTN (the battery terminal has a link wire from the siren) wihtout any success. Any advice greatly appreciated. HMM this is a difficult one, maybe you should approach the vendor for instruction. It is unlikely you recieve help on an installers product it is not DIY kit. Topic Closed Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.