south_side Posted October 2, 2006 Share Posted October 2, 2006 Hello I have just installed this system and the manual claims that by pressing buttons 1&3 should activate the panic alarm but mines does nothing, can you help ????? Thanks Link to comment Share on other sites More sharing options...
Guest Posted October 2, 2006 Share Posted October 2, 2006 it comes out of the box with that feature disabled, you need to be in engineers to do that. Unless you have the engineers code your not going to be able to do anything about it. Link to comment Share on other sites More sharing options...
Guest Posted October 2, 2006 Share Posted October 2, 2006 Derr at my reply, we just sorted you out with the strobe stuff. Go to option 87, scroll with A and B till you see PA press 1 to enable. then get out of engineering and press 1 & 3 it will make some noises Link to comment Share on other sites More sharing options...
whistle Posted October 2, 2006 Share Posted October 2, 2006 Derr at my reply, we just sorted you out with the strobe stuff.Go to option 87, scroll with A and B till you see PA press 1 to enable.then get out of engineering and press 1 & 3 it will make some noises option 87 then 1 then tick this will enable the pa function Link to comment Share on other sites More sharing options...
Barsnake Posted October 2, 2006 Share Posted October 2, 2006 And Make Sure You've Not Accidently Programmed 30 As Silent Link to comment Share on other sites More sharing options...
south_side Posted October 3, 2006 Author Share Posted October 3, 2006 that worked a treat ! thanks again, again Link to comment Share on other sites More sharing options...
Guest Posted October 3, 2006 Share Posted October 3, 2006 woods for trees syndrome there lads Pull the link out of output 3 though south. Link to comment Share on other sites More sharing options...
south_side Posted October 4, 2006 Author Share Posted October 4, 2006 why do I need to remove the link old hand ? Link to comment Share on other sites More sharing options...
Guest Posted October 4, 2006 Share Posted October 4, 2006 why do I need to remove the link old hand ? Because you can programe the strobe to activate for ten seconds as a set indication on its own output. No need for output 3 now. PS its a few replies above here how to prog it. Link to comment Share on other sites More sharing options...
Barsnake Posted October 4, 2006 Share Posted October 4, 2006 why do I need to remove the link old hand ? From The Other Post About Strobe Set, I Believe Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.