Guest ALSEC Posted August 28, 2006 Share Posted August 28, 2006 Alternatively cut your losses and get a proper alarm put in? Link to comment Share on other sites More sharing options...
The Trautbec Posted August 28, 2006 Share Posted August 28, 2006 There is nothing wrong with these alarm, they are a Very good low cost alternative. I take it you have never inbstalled one then?? Or you would not say this. Just trying to do my job stuart@homeguardsecurity.co.uk Link to comment Share on other sites More sharing options...
Guest ALSEC Posted August 28, 2006 Share Posted August 28, 2006 Whatever.. Link to comment Share on other sites More sharing options...
camerabloke Posted August 28, 2006 Share Posted August 28, 2006 jerreeee, jerreee ,jerreee Eucam Security Systems 0845 4630 746 www.eucam.co.uk Link to comment Share on other sites More sharing options...
Guest Posted August 28, 2006 Share Posted August 28, 2006 There is nothing wrong with these alarm, Depends what your doing with them? I take it you have never inbstalled one then?? Nope. interestingly theres nothing on Esp's literature to say to what stanadard they conform to just "European standard 868MHz" so thats the frequency stated what about a standard for the controls ect... Link to comment Share on other sites More sharing options...
John Hewitt Posted August 28, 2006 Author Share Posted August 28, 2006 Hi Guys, I'm glad to say that I'm one happy bunny today I had indeed got the PIRs upside down and the beams were looking at the ceiling Now I've got that sussed out and with the help of you chaps I know that nothing will happen in the first 4 minutes of arming the system. I can arm it, go through the 30-second exit delay and then come back 5 minutes later to open the door and straight away be greeted by the 30-second entry delay tones, just as it should be. Once again, a big thank you to all who contributed , John. Link to comment Share on other sites More sharing options...
Guest rjbsec Posted August 28, 2006 Share Posted August 28, 2006 And they have the nerve to call it "boys toys" Link to comment Share on other sites More sharing options...
dpaengineer Posted August 28, 2006 Share Posted August 28, 2006 Glad you got it sorted mate. Trade Member Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.