Guest Wallis Posted January 24, 2004 Share Posted January 24, 2004 I need to omit a zone on a part of the house that has been demolished but when i try to go into the programming menu by entering the engineer code and pressing prog it comes back with a null tone and only the zone with a fault on it is lit not all of them as should be. So now i'm at the stage where i can't change anything. Any Ideas. Link to comment Share on other sites More sharing options...
FASTCAR Posted January 24, 2004 Share Posted January 24, 2004 Try code ,full, omit , zone number , prog. Link to comment Share on other sites More sharing options...
Guest Guest Posted January 24, 2004 Share Posted January 24, 2004 Yes that works and i've no problem setting the thing but when I want to change the acces code or anything like that l cant. l wanted to completely omit the zone in programming so that when i enter my code and press full the alarm would work without me having to omit anything. Plus l still cant change the code. Link to comment Share on other sites More sharing options...
FASTCAR Posted January 24, 2004 Share Posted January 24, 2004 If its an older system try CODE , 0,0. If this works , you have the older system , and you will need the old installer guide. Link to comment Share on other sites More sharing options...
Guest Guest Posted January 24, 2004 Share Posted January 24, 2004 :mellow: No joy when l put in the engineers code and press prog its giving me a null tone so l cant get to the stage to try 00. Link to comment Share on other sites More sharing options...
FASTCAR Posted January 24, 2004 Share Posted January 24, 2004 If its an older system try CODE , 0,0. all lights should illuminate.But if you are struggling at this stage , do you think you should proceed?. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.