Search the Community
Showing results for tags 'cooper security'.
Found 2 results
-
I have a yellow light on the control unit that states 'call installer' The log also reports "Tamper Z07 Rstr" which is the remote input panel This was after the property lost power and was hard-reset at the fuse box. Any suggestion is welcome -
Earlier in the year I installed an I-on40 and two keypads, type KP-01. I had a problem after a month of two whereby the keypads beep indicating 'Duplicate Entry.' I tried replacing the keypads, but this did not resolve the issue. I had thought that it might be caused by line termination. It worked for several months, with one -the furthest away- terminated and the other unterminated, but the 'Duplicate Entry'; has returned. KP1 is located about 1 meter away from the I-on40; KP2 is located about 10 meters away. KP1 is set to address 4; KP2 to address 2. The error occurs whether I try setting or unsetting the I-on40 either manually, by typing in the code, or by using a fob. The I-on40 has s/w version 4.03.09 and the two keypads are at verison 3.11. Any suggestions, please?
