Tjeerd

Reusing the RF kit you already have probably means staying with Risco. Looking over the horizon probably mostly known Texecom and Honeywell and bit less known there's Satel which tends to stay way more up to date with current tech.

Haha ... dunno if it was intentional, have seen it on the first few, none ever returned because of the "fix". Wouldn't classify it as poor manufacturing, maybe a glitch? My mind is still boggled over a panel without terminals ...

Many of the flex boards have a little deviation there, if a straight link doesn't solve the 0004 tamper, use a 1K resistor either in series with bell tamper or to link it out directly between T and 0V and it should work just fine.

Putting a 1K resistor between 0V and T should solve it.

Hey everyone, I am the creator of a module for the Honeywell Galaxy series panels ( https://seasoft.nl ) and received a question in regards to a certified installation and integration into HA. As far as I understood there are some sections in the BSI regs that deal with this for remote arming / disarming. Can someone give a short recap on the hardware requirements for certification and software implementation?