David1

Have tried on line 1 and 2 with address set to 0 and 1 on both lines my keypad is set to 0 on line 1 at the moment

Yes shows no modules added

hi, the version n0 is 7.02 and have tried all addresses up to 8

Hi I have got a Galaxy Dimension 520 and i am trying to connect a CO79-2 rf portal to my panel (line2) have got a keypad connected to line 1. The red LED is on a slow flash (bad communication) on the CO79-2 pcb. Have tried all combinations for connections with no success. the main board has a line expansion board fitted. Have i missed something in setting up or is the RF unit faulty (ebay) although new and boxed. Any advice Thanks Dave

I will have to check, as a matter of interest where is the led and relay situated on the board to check it is nothing obvious

Cheers sounds as though I’ve been done

The keypad address is set to 0 and there are no lights showing on the main board

Hi everyone, I am to this forum and I am looking for some advice. Have recently bought a GD 48 alarm, C037 keypad and standby battery, I have also replaced the on board button battery. My problem is that the keypad is showing ************ and I cannot get past this on power up. Have read previous posts with no success con anyone help. Thanks