bowlingman

two of the expanders are remote the third is adjacent to the panel. one thing I forgot to mention in my original post my 595 allows me to split the system into three areas and set/unset them individually which is very useful although if necessary I could manage without.

Yucel 7ah But even when battery is not connected I would have expected charge volts from panel to be around 13 not 6.6 volts.

It sounded and the kp display reads fuse/battery fault The battery is only one month old, the inline fuse to the battery is ok as is the two pcb fuses The voltage at the battery terminals with the battery disconnected is 6.6v The voltage of battery is 11v I suspect the power supply in the pcb may be to blame.

I installed a Gartec 595 system some years ago its now developed a problem, to repair I require a replacement end panel pcb if possible. If not I will replace system, it would be nice if I could use existing wiring etc so any recommends would be appreciated. I require end panel with 8 zones, 3 remote zone interfaces/expanders 4 zones each, 2 remote lcd kp, Thank you