gazh
-
Posts
12 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Posts posted by gazh
-
-
hi yea there are 2 wires going to the micro switch do you say its ok to loop the 2 wires together and remove the switch , the switch do,s plug into a pcb but id rather not mess around with it , the wire are yellow and red
-
hi , wonder if anyone could help with problems concerning yale wireless alarm hsa 3000 series
when on sunny days the alarm go,s off on its own , i found out its the tamper switch inside the alarm siren box and the cover must expand with the heat of the sun causing the tamper switch to move , ive tried a few times to pack the switch so the switch is tight closed but after a while im back to square 1.
the question is can i disconnect the tamper switch or loop the yellow and red wires together or maybe just fit a 12v on/off switch to bypass this. any help appreciated
-
hi lads can anyone help . ive got a veritas 8 system in my house which was installed before we bought the property , the alarm has been working ok up till now where when we set the alarm itjust keep beeping and wont set , when doing a walk test its saying zone 3 which is just a pir , even when alarm is not set the pir is just constantly flashing on and off , is it time to change the pir as im assuming there is nothing wrong with the wiring as its been working ok . any help appreciated thanks gaz
-
hi i was thinking of the optima g4 about £40.-50 quid , are these paneals reliable thanks
-
would you recommend another panel similar so i could do like for like wiring , maybe another optima ?
-
hi yes thanks for the info its much appreciated , im having problems getting pics up , when i replace the cover on bellbox and cover on panel the keypad is locked ...no response when trying to enter the code ?? is there anything i could try or can you advise my next move thanks gaz
-
hi from panel wiring is
black wire to bell -
red wire to bell +
blue wire to scb a
yellow wire to scb t
white wire to strobe -
green wire to strobe +
the ade reson 8 siren box is
white wire to strobe -
black to trigger -
blue wire to hold off -
red wire to hold off +
yellow wire to rtn -
hope this helps thanks gaz
the thing thats confusing is that i have the green wire strobe + that has no where to go in the bellbox ?
-
im having probs posting pics up but hope to get it sorted
-
hi i wired it like for like from the panel but there is an extra wire marked strobe + from the panel which has no where to go in the bell box its just a strobe - fitting , the panel is in test mode i think but there is no response from keypad , i tried doing what it says in the manual
eg
turn off from mains , remove battery , connect wire from 9 to 19 to clear nvm etc but still no response from keypad , is there anything else i could try ? many thanks
-
hi yes i see your point but when i put the link inside the bellbox to battery charge it go,s off continuous and i cant reset the keypad because its locked out and no response from the keypad at all ?
-
hi can anyone give me any advice , i recently changed the battery on the control panel after electrics where switched off for a job and the control panel locked out . since then and before this there has never been any trouble. i tried to change the siren/strobe box outside as this was not working , i turned off electrics and removed the battery and all fine, removed outside box and fitted a ade reson8 box but when i came to do wiring like for like i had a strobe + wire which comes from the control panel but has no place to go in the reson8 box? when i change the link to battery charge the alarm sounds constantly ? can anyone help to tell me whether i have to link this strobe + wire to something else , also the control panel is in lock down and even when following the installers instructions on removing memory to factory reset there is nothing , no response from keypad hope someone out there can help many thans gaz
yale wireless hsa 3000 series tamper problems
in !!..DIY Installers..!!
Posted
Thanks lads for the info its much appreciated , going to replace the whole lot soon just needed this sortin for now..which is the best wireless upgrade to go for