stelmo
-
Posts
42 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Posts posted by stelmo
-
-
Definitely says 'System Fault, Reset Required'
According to the manual it should result in 'no audible or visual indication of the activation'
-
Im sure there is an obvious answer to this but its baffled me
Ive wired up a relay to zone 2 on a galaxy dimension and set the function to PA silent.
when the relay opens all I get is 'System Fault'
ive got a 1k resistor in series then a 1k across the relay, so it measures 2k when open and 1k when closed
If I change the function of the zone to intruder, from pa silent then opening and closing the relay gives no error!
bizarre...
-
22 hours ago, GalaxyGuy said:
Program a link with the input as the final zone you want. Then link destination to the first available link. Ie. Link A. After that, change the output you want to link A and set as reflex. The output will trigger when the final zone is open.
Thanks for that Ill give it a go
-
Can I set a trigger output from the panel that say when the door opens it controls a relay even when the alarm is not set?
i want the input to go to the lights control, save me wiring up other sensors
Galaxy Dimension 96 with RSS
It would probably be wired to an entry exit zone door switch
-
3 hours ago, Nova-Security said:
There is in the keypad programming
I see an option for the backlight for the screen on/off but not the keys brightness level
-
I just thought there was maybe some key combination to adjust the brightness
I guess they are just duff
-
14 minutes ago, norman said:
Have you tried swapping the RKP's to see if it's a voltage issue?
yea doesn't seem to be a voltage problem
-
3 minutes ago, al-yeti said:
Is it because your comparing to the mk8?
Not sure what you mean there
all 3 are MK8, 2 of them seem have very little in the way of backlight behind the keys
-
I have a couple of Galaxy MK8 keypads and for some reason the key backlight is hardly visible
My other MK8 is bright but these 2, barely lit, is there some way to adjust it?
I see no controls on the PCB.
The screen backlight seems OK
-
Does anyone have a CEL Discovery/Voyager panel lying around with the printer interface they could part with?
-
2 hours ago, goncall said:
Use a menvier m12
Looks ideal, thanks
-
Ment to say also that I dont want to use the wireless offering via the RF module, Id rather hard wire them
1 minute ago, norman said:For a residential property they are fine, they are connected in the same way as the other detection.
So presumably just find a smoke detector that has a relay output and wire it upto the zone?
-
I have a Galaxy dimension, which has fire zones I see in the manual.
Anyone have experience of connecting up detectors to this?
or is it best to stick to a dedicated panel?
-
that will do all connected modules will it, not just just the galaxy panel?
Scrub that question, i see the e080 has its own spi socket
-
Hey
How do I get my E080-2 upto the latest firmware? I think it needs 2.11
Is it via the SPI key process?
or can I do it from the RSS Suite?
elmo
-
is it available on the net?
-
5 hours ago, datadiffusion said:
Personally on a domestic, I would stick to simple.
I have a 4 zone Fike Twinflex at home and even that is total overkill (although we do have a few outbuildings and an annexe).
Fair point but the whole lot with detectors is here now in a box ready to go, seems a shame to waste it
Plus the Gent nano is a small unit for domestic / small office environments
-
Unit is still in the box, I haven't looked at it since I last posted.
However I'm getting to the point in my house build to decide to use it or not.
Would anyone be able to get me a copy of the firmware?
I'm on V2.56 at the moment
-
LOL, as its a gent nano did you hear a click from the panel every minute!?
http://www.thesecurityinstaller.co.uk/community/topic/38107-gent-panel-clicking-every-60-seconds/
-
Yeah id ignore it.
Loop voltage is over 30 volta on these so i think its a regulator but not 100%.
Never had any issues with one thats clicking every minute
Good enough for me, thanks
-
Gent panels do click every so often its a quirk. Doesnt mean anything is wrong
After working on these panela for 10 plus years its become a white noise but its there lol
But its regular as clockwork, every 60 seconds - just ignore it?
-
the isolators are in the device not the base...
Well I did say it was the panel that was clicking
anyhow forget about it I'm bored looking at it
Thanks for the suggestions everyone that was kind enough to offer useful input.
-
When there is no power on the loop the loop isolaters don't operate, i dont know gent that well have the devices you are using go isolated bases ? is one wired wrong ?
Ive tried running it with just the isolated base only (no device attached) and only a single call point
I think ill bin it to be honest, I dont trust it with this clicking that its doing
-
This relay
As above what is that output programmed as?
These are internal relays that are not programmable, if I understand your question
Galaxy PA just triggers a fault
in Control Panels (Public)
Posted
Im concluding that this is some sort of obfuscation of the event(Personal attack input), whilst also indicating that something needs dealing with?
Ill go through the event logs, but ive come to the conclusion that this is by design, and not documented