stelmo
-
Posts
42 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Posts posted by stelmo
-
-
If you have it on a bench and the loop is made up of a couple of meters of cable, the loop may be to short and resistance of the loop is not enough for the panel.
good idea, ill try a resistor on the line
-
Im only running with 2 detectors on a small run of cable, i will swap the detectors over with some spares I have
From what I can gather the Gent nano panel is very cut down from the stuff you guys probably deal with and as such quite straight forward menus, but i will look again and see if I can see anything thats responsible for this clicking
I might also try the loop with no detectors at all in the bases and see if it still clicks
-
I dont see anything relating to relays, but i will have another look when I get a moment
-
Whats it programmed as?
Not sure I understand the question
-
RL2 by the looks of it which looks to be linked closely to the loop circuit
-
Its just the panel by itself on my bench, single loop with 2 s-quad detectors attached nothing else
I've commissioned the loop and and its correctly identifying the devices, the only thing I have tried is a smoke test
-
its a single on/off fast click once every minute
im on V2.56 of the main controller and v1.04 loop firmware
-
You guys are awesome, must give you a warm glow being so helpful
-
I'm sure you will work it out for yourself superstar,now fo back to DIY.com
Well I'm sure I will, I guessed the engineer & Maintenance code and as I say its working so its no great shakes I was just curious as to the clicking
-
If you haven't got anything constructive to add to the discussion regarding the initial post then please don't bother, I can assure you I'm well aware of certain fire alarm engineers that frequent forums who have a theory that what they do is something akin to brain surgery.The simple matter is, you have no idea whats the issue is but feel the need to post verbal poo
-
1
-
-
its my own system, its sat on my bench at the moment
if I recall its for his own house which becomes a small unit which moves from the uplands of Scotland to London,but it keeps the post count up,you might even get some twitter followers which is cool as fck like
Are you feeling OK?
-
I haven't tested a fire condition
loop is detected ok and I can sound the alarms in the s-quad detectors
-
I'm hearing a relay click every minute precisely on a Gent Nano fire panel
No faults are logged and seems happy, but I cant think that its normal
Any ideas folks?
-
Ive managed to default the panel and guess the code
-
I have the customer code as 0000, so im assuming the engineer access is also the default, but I have no idea what that is, Gent seem to keep everything but the customer manual under lock and key
I live in the far north of Scotland, long way from any authorised installer
Its only a 16 zone system, quite small unit
-
Hi Folks
Ive purchased a small Gent Nano panel for replacing a dated system in my old house and im having difficulty getting into engineer mode.
Can I reset this thing to default settings somehow?
Im beginning to think its somewhat a waste of money if I need a Gent installer to commission it for me
danny
Gent Panel Clicking Every 60 Seconds
in General Fire Alarm Queries
Posted · Edited by stelmo
Nah nothing made any difference
When the loop is powered down this clicking doesn't happen